How to Heel Your Feet After Wearing Your New Online Shoes Purchases From Australia

I think the ease of purchasing online shoes in Australia has a lot to answer for. These days my wardrobe is full of shiny new pumps waiting for a night out. With so many new heels to wear in, I’ve noticed after a big night out my feet are particular sore. As I keep wearing my new shoes, it seems my feet always take a bit of beating. If you have struggled with sore feet inflicted from high heel usage, below are five tips to help sooth your poor, abused feet.

Go barefoot
After a night on the town with your favourite heels, it’s important to give your feet time to heal. Going barefoot is an extremely important part of the healing process. Blisters, swelling and bruises heal best when they’re not enclosed in shoes, so let your feet breath easy on their own.

Treat any open blisters
If you’ve awoken to a nasty blister on your foot after a big night out in your hells, make sure you attend to them. In no situation is it ok to pop the blisters. While you may think it will help, it actually makes it worse. In fact, a blister is actually like a natural bandaid, and is created by the body to make sure the skin underneath stays nice and clean. Instead, disinfect the area and pop a bandaid on top.

Soak your feet
You have most likely put a lot of undeserved strain on your poor little feet after a night of high heel abuse. To say sorry to your feet, draw a warm foot bath and let your feet soak. At first when you sink your feet into the hot water it may sting slightly, but you need to push past the pain. Soon the hot water will start to work and end up soothing your muscles. If you’ve particularly thrashed your feet on a night out, try dripping in some essential oils to provide extra soothing. Essential oils known for their healing power include basil, marjoram and peppermint.

Wait
In most cases, if you’re a lover of high heels, you want to be back parading around in your highest pair as soon as possible. The bad news is, wearing heels straight after you’ve already done damage to your feet, will only result in more damage. Trust me, damage on damage is not good. Much patience is needed during the healing time to ensure you don’t cause major damage to your feet. It’s important to stay off those fabulous new heels you’ve just bought, until your feet have stopped hurting and all the wounds are healed.

Get a pedicure
While high heels are pretty, your feet after wearing them for long periods of time are not. To inject a bit of beauty back into your feet, a pedicure is a good idea. While most women think a pedicure is just a new layer of toe nail polish, it’s much more than that. A good beautician will exfoliate your feet as well as pumice the calluses you’ve built up on your feet, away. Lets not forget the beautiful new hue of nail polish that will give your feet a new lease on life.

If your feet are recovering from high heel abuse, sit back at do a bit of online shopping. Check out the online shoes available from Shoe Shed at www.shoeshed.com.au.

Avoid Costly Roof Repairs by Investing in Roof Sprayers

Many homeowners don’t understand the important of roof sprayers. Most likely it’s because their roof is out of sight and out of mind. However, once a problem strikes, they’ll be wishing they kept up to date with their roof’s maintenance. If you haven’t take care of your roof for an extended period of time, keep reading to find out the benefits of keeping up with roof maintenance.

Prevents growth of organisms that eat your roof
When you neglect your roof top organisms begin to grow and actually feed off your shingles. The organisms most common to roofs are lichens, moss and algae. With shingles acting as a viable food source for these organisms, they are sure to stay and keep feeding. This is very bad news for your roof, as over time it will begin to cause a considerable amount of damage. To ensure this doesn’t happen to your roof, roof spraying and cleaning is essential.

Avoid wood rot
When the organisms outlined below begin to eat away at your shingles, over time wood rot can become a problem. Once the organisms have munched their way through the shingles, they then attack the roof deck, which is then how the wood rot occurs. What makes the matter even worse is, once the wood rots it become home to mold growth, which can put you and your family’s health at risk. To avoid this type of serious damage, it’s important to be proactive about roof cleaning and have your roof sprayed and cleaned on a regular basis.

Ensure your homeowners insurance policy remains valid
It’s important to look at the fine print of your homeowners policy to determine the level of care you need to provide for your home. For many homeowners with stained roofs, it’s a part of their policy to comply with regular roof cleaning. Failure to do so actually results in losing your insurance coverage. In some instances, your insurance company can demand you have your roof cleaned in a short amount of time, or they will revoke your policy.

Avoid increases to your energy costs
Many people do not fully understand the consequences of neglecting their roof. Some people would be surprised to learn that a dirty roof covered in moss and algae can actually increase your cooling costs. What happens is the dirt that covers your roof stops it from being able to effectively reflect sunlight. Therefore, the moss and algae end up heating up and radiating this heat into the top of your home. This additional home makes it extra difficult to keep it cool during the summer, resulting in a growing energy bill. By simply spraying down your roof with a roof sprayer, you can enjoy lower cooling bills.

Avoid costly repairs
Some homeowners deem the cost of professionally cleaning their roof expensive, but they have clearly never had to pay for roof repairs. In reality, repairing your roof is much more expensive than maintaining it. Keeping up with regular cleans and preserving the surface of your roof, is much more cost effective than paying for unnecessary repairs later down the track.

If you want to take action on your roof, invest in roof sprayers. The professional team at Green Gorilla have a range of Roof Sprayers.

Cleaning Secrets to Make The Glass in Your Adelaide Home Spotless

Despite your best efforts, the glass around your Adelaide home gets dirty quickly. The surface renowned for showing up streaks needs constant care in order to sparkle and look presentable. Often the job is high on the light of jobs homeowners don’t want to complete themselves, as it is hard work, usually for little reward. Many people find, the more energy they exert cleaning the windows, the less likely they will look any good. If you want to ensure your windows sparkle every time you clean them, follow the simple steps below.

1.  The first step to achieving sparkling windows is preparation. Before you start cleaning, assemble all your cleaning supplies you will need. For the clean you will need distilled water, white vinegar, spray bottle, a cloth, cotton swabs and soft toothbrush.   
2. In the instance where you are cleaning glass windows in your home, you will need to cover the window sills with towels. Do not skip this step, especially if you have wooden windersills, as the water solution will cause damage.
3. Now it’s time to start making the cleaning solution you will use on the windows. Open up the spray bottle and simple pour inside one part white vinegar and four parts distilled water. Screw the spray lid back on and give the mixture a shake.
4. Grab your cleaning cloth and spray some of the cleaning solution onto it. There are a few different cloths you can use to accomplish a quality clean. Either a soft lint-free cloth or a micro-fibre cloth are ideal. It’s also a good idea to have newspaper at hand.
5. With the solution on the cloth, apply it to the windows and rub the glass in circular motions. Concentrate on areas that have built up dirt to ensure you get rid of any marks. Once all the spots are removed, start wiping the entire window with vertical strokes. Next, follow with horizontal wipes to finish up, so the glass looks nice and shiny.
6. Now it’s time to focus on the corners of the glass, which often get overlooked during a clean. Using either a soft toothbrush or cotton swap, clean the edges so allt he grime that has built up is removed.
7. The last step is to buff the window. This will ensure any streaks that are currently present will vanish. Newspaper is the perfect thing to use to buff. There is something about the print that makes your windows streak free and sparkling. Make sure before you begin buffing that you wear gloves so none of the newspaper print ends up on your hands.

Now you know how to clean your windows effectively, you have no excuse for leaving them dirty! While hiring a professional to do the job for you can be extremely tempting, the method above is actually very simple and will give you the results you want without the unnecessary elbow grease. 

With your windows now so clean, it’s important to act with caution. It sounds silly, but windows that are sparkling clean can become a bit of a hazard. As they look so transparent, it has been none for animals and people to mistake glass for not being actually there, and that’s when accidents occur. In the instance where glass is broken or needs to be replaced, contact the professional team at Q Glass and Glazing. They offer a range of Glass Replacement Services in Adelaide and Swill have your domestic or commercial glass fixed in no time.

Ask An Electrician in Port Melbourne: How Do You Change a Light Bulb?

It’s the age-old joke that I’m sure many an electrician has been asked in a Port Melbourne pub; how many electricians does it take to change a light bulb. The joke obviously varies from participants to blondes, teachers, to different races, but it still stands. The joke makes fun of a seemingly obvious task, however, to some it’s not so simple.

It’s embarrassing to admit, but I have never changed a light bulb in my life. I’ve watched my parents change their fair share, however, since moving out of home I’ve had no need. The rental property I live in is brand new and has down lighting, which has not needed to be changed. While a few bulbs have gone out, I just simply call maintenance to get it fixed.

To be honest, the whole messing around with electricity thing, kind of scares me. I know it would be ridiculous to hire a professional electrician to change a light bulb for you, but for me it would be a plausible option because I just have no idea.  I’ve decided to take a stance against my lack of light bulb knowledge and do a bit of research. After checking out in fact how you do it, it seems pretty easy, and it doesn’t seem like there’s much risk of getting hurt. So, for those like me who are too scared to admit that they’ve never changed a light bulb, your secret is safe for me. Next time you get caught in a pickle, stay calm and follow the steps below. You’ll have anyone believing you’re a pro at changing a lightbulb.

1. Examine the fixture that holds the light bulb that is no longer working. Bulbs come in all different wattages and sizes, so it’s important to know what you will need to replace the old one. The bulb will usually have a label outlining the wattage and amp rating.
2. The first step to changing your light bulb is to switch the light in question off. This is necessary, as it will stop you from risking electrocution. Safety is paramount, so make sure you carry out this step first before advancing any further.
3. In the instances where the light bulb you are changing is still functioning, you must give it time to cool down. Generally all it takes is a good 30 seconds for the light bulb to cool down, however, of course this will depend on how long the light has been turned on for.
4. Twist the burnt out lamp from the socket, which is very simple. Don’t be too forceful, as you don’t want to end up shattering the light within your fingers. Once the light bulb is out of the socket, dispose of it properly. A good idea is to wrap it in newspaper, incase it shatters inside the bin.
5. Now it’s time to install the new light bulb. Simply twist it into place, making sure you don’t over-tighten it. If you press to hard, the light bulb can get damaged or even shatter within the socket.
6. The final step it to turn the light switch back on. If these steps have been followed properly, the light bulb should illuminate with no worry. In the instance where, you’ve flicked the switch on and nothing has happened, turn it back off and revist the steps again.

Now you know how to change a lightbulb, you can join in the banter with everyone else. Make sure though that if you need any further electrical help to hire a professional electrician from Electricians on Call.Visit their website for more information at http://electriciansoncall.com.au. 

Take Care of Your Glass in Adelaide The Right Way

One job that is difficult to execute properly in your Adelaide home is glass cleaning. Despite your best efforts, it can be hard to get your glass looking streak free and fabulous. If you spend a lot of time window cleaning, but struggle to get the results you want, then try the following tips below.

Use distilled water
Many novices don’t realize that when it comes to cleaning glass, it’s all about the tools, rather than the amount of effort needed. Most of the time, people put off window cleaning because of all the reaching and wiping required. The elbow grease required to clean a window, often seems wasted when the result is streaky glass, despite your best effort to clean them. Fortunately, the answer to crystal clean windows isn’t more effort, but actually it’s all about the products you use. Most people blindly use tap water, thinking that is will help with the cleaning process. In reality, these people are wrong. Tap water actually contains a lot of minerals that can effect the clean. The better option is to use distilled water, which will create a nice, clean wash that doesn’t leave any streaks.

Test out the vinegar
You may not realize, but you most likely have a multipurpose cleaning sitting in your pantry. The good old vinegar actually works a treat on a range of dirty surfaces, including windows. Simply mix half water and half vinegar into a spray bottle and spray it on your windows and wipe it. To ensure a sparkling, streak free finish, wipe the windows off with some newspaper. The print on the newspaper has this amazing ability to dry the window perfectly, leaving it crystal clear.

Reduce suds
Funnily enough, an abundance of suds does not equate to nice, clean windows. In fact instead, it does the opposite and leaves the glass full of streaks. If there is a circumstance where the glass is overtly dirty and soap is required, it’s important to keep it to a minimum.

Toss out the paper towel
Many people favour paper towel to assist with the window cleaning process. In fact, it’s often a part of their window cleaning kit. Unfortunately, paper towel is actually detrimental to the glass cleaning process. When it is wiped across the windows it leaves linty streaks, which is what you want to avoid. A much better alternative is a microfiber cloth, a squeegee, or even better newspaper. In the instance where you pick newspaper, make sure you equip yourself with gloves to avoid getting ink on your hands.

Give it a buff to finish off
Unfortunately, no matter how hard you try you are always going to end up with a few streaks. If you have tried all the above steps and streaks have still occurred, try the following solution. All you need to do is finish off the clean with a quick buff. Using a microfiber cloth or chamois that is dry, buff the glass as your last step. This will make those annoying streaks disappear for good.

Now you know how to clean glass effectively, why not upgrade some of the glass in your home or office? The team at Q Glass and Glazing are specialist glaziers that install and Repair Glass Around Adelaide.

The Five Facts Every Adelaide Household Must Consider Before Building Pergolas

All the rage in Adelaide at the moment is pergolas. The once traditional structure, is now growing in popularity. What was once just a timber structure with vines growing throughout, is now a big outdoor living trend. No longer are homeowners restricted with timber pergolas, but the materials used and design options are endless. If you want a piece of the trend and have decided to build a pergola on your property, it’s essential to consider the facts below.

Gain appropriate council approval for your pergola
It is important to check with your council before beginning to constructed your pergola. While many councils do not require pergolas to go through the council approval process, there are some that do. If the approval process is required, there are a range of factors the council considers including the position of the pergola, its size and where you live. It may be that you can avoid the entire length approval process if you change your plans slightly. For example, if you position your pergola away from neighbouring properties or alter the design slightly, it could be enough to avoid review.

When you hire a professional building company to undertake the construction, you will find most actually offer council liaison as a part of their process. Therefore, they will take care of the process, as well as include it within their bill.

Check out other pergolas
Pergolas come in many different shapes and sizes. While originally, Pergolas in Adelaide were solely made from timber and crafted to allow vines and flowers to run through the structure, these days they are quite different. With a range of different materials and designs to choose from, it’s important to ensure you make the right choice. Even though you might love the design of your friend’s pergola, it actually may not be the right fit for you. Make sure you understand all the different design options available before settling on the one you want. That way you are guaranteed to get something you will enjoy and love for a lifetime.

Think about the budget
During the planning process it’s vital you make sure your dreams match up with your budget. It can be easy to get swept up in the beautiful designs you see, however, you must ensure you can actually pay for the structure once it is done. The good news is, if you speak to your builder there are a range of different ways you can alter your design so it’s more affordable.

To DIY or rely on the professionals?
Many people are motivated by the idea of DIY jobs, as they feel it will save them some money. Of course, there are also those individuals who enjoy building themselves and like to achieve the satisfaction of doing something themselves. If you have been contemplating building your pergolas yourself, it’s important to consider all the facts. Being honest and realistic with yourself is the best way to determine whether or not if it is a good idea. For example, if you’re not really a handy man and you are just trying to save yourself money, the DIY project probably isn’t the best idea. In the end, it will most likely end up costing you more and wasting your time. Sometimes for a simple project, it’s best to rely on the professionals. 

Gain several quotes
Make sure you get a range of quotes from different builders. It order to determine if a builder’s offerings are good, you will have to compare them with another quote. Gaining various quotes also allows you to explore your options. Some pergola designers may stay inside the box, while other may come up with some idea that you have never thought of before.

If you are looking for a reputable builder to bring your dream pergola to life, talk to the team at Pergolarific. With years of experience they have earned themselves a trusted reputation as the experts in pergolas in Adelaide. Visit their website to learn more at http://pergolarific.com.au.

Agricultural Sprayers Can Help Make Your Garden Flourish

Utilising agricultural sprayers in your backyard is a great way to grow your own produce. There is nothing better than heading out to your garden and harvesting your own fruits and vegetables to eat. You can be assured that nothing tastes better or is more satisfying then food you have grown yourself. Below we have outlined how to look after a humble lemon tree. Often a lemon tree is a good fruit tree to start on, with lemons a staple ingredient in a lot of foods and drinks.

Weather conditions
When most people think citrus fruits, they often think about summer. Not only are these gorgeous fruits delightful to enjoy in the warmer months, but that coincidentally is when the trees themselves are the happiest. Citrus trees thrive in sunny temperatures between 50-80A F.  When winter arrives and the temperature dramatically drops, there is the option of bringing your lemon tree inside to keep it away from the frosty conditions. 

Indoors
In the instance where you have to bring your lemon tree indoors, it’s very important to ensure it has enough natural light. A good idea is to place your tree in a sunny window, however, keep in mind that too much sun can actually result in burning the plant, so you must be careful. It is possible to purchase grow lights that will help stimulate your lemon tree’s growth indoors. Shop lights that have one cold and one warm bulb are also effective. Though it is possible to keep your lemon tree thriving by ensuring it gets enough natural light through the window.

Feeding
The period of spring to fall is considered the growing season for lemon trees and is the time you need to feed it. Cirtus plants feed off two types of fertilizers. They first is an all-purpose, slow release fertilizer, while the other is a high nitrogen fertilizer. You can even try additional foliar feeding using a liquid fertiliser. 

Watering
For any citrus plant, particularly those grown in pots, adequate watering is the best way to make it grow nicely. You should aim to keep the soil in the pot moist, but not to the point where it is considered wet.  A good way to test that the watering is correct is to push your finger into the soil. Push down up to at least the second knuckle to test. If you can feel that the soil is dry, then it’s time to water. However, if there is dampness at your fingertip, then leave watering for another day. In the instance where a watering is required, keep pouring water into the soil until it begins running out of the bottom of the pot. Make sure you purchase pot feel for your lemon tree, so water spurts out and isn’t left at a pool at the bottom for the tree to sit in all the time. If you are keeping your lemon tree inside, another good tip is to give the leaves a little spritz of water with a spray bottle from time to time. This will work wonders for your lemon tree and stop it drying out if the heating is being used.

Harvesting
The moment fruit starts growing on your citrus tree is extremely exciting. Once is begins to develop, all you want to do is pick it and enjoy the goodness.  It’s important to be patient though because if you pick it at the wrong time, it won’t be as nice as if you waited. A lemon will usually be an egg yolk yellow colour when it’s ready to be picked. When you touch it, it should be slightly soft to touch. For those people who keep their lemon tree inside during the cold period, it’s important to note that fruit can take up to a year to finally ripen. It’s crucial you wait until it’s ripe before you harvest it, as lemons actually continue to ripen whilst they’re still attached to the tree. When it’s finally time to harvest, make sure you don’t pull the lemon from the tree. While this is the most obvious way to remove the lemon, it can actually result in damage to the try. Instead use a knife or scissors to cut the fruit from the tree.

If you would like to start growing your own produce, it’s a good idea to purchase your own Agricultural Sprayers. Talk to the team at Green Gorilla