What Are The Main Electrical Testing Methods?

Regular test and tag services in Melbourne are essential for any employer in order to abide by their Duty of Care responsibilities as well as satisfy a legal requirement. However, most employers know very little about what their electrical team is actually doing. It is always a good idea to remain informed on procedures such as this so that you can be confident that you are adhering to your obligations.

The very first step that your electrical team will perform on site is a formal visual inspection. This may seem obvious, but it needs to be carried out in a particular way by a qualified professional. Anybody might be able to notice a glaringly obvious issue such as a frayed wire, but it takes the attention to detail of an experienced and well trained individual to spot some of the less obvious faults. Never underestimate the significance of this first process. Health Safety Environment Australia (HSE) has indicated that approximately 90% of faults can be identified via a formal visual inspection alone. Signs of damage may include cracks in the plug, tangled or cut cords, overloaded power boards and any clear deficits in accessories or sockets.

Once the visual inspection is complete, a thorough testing is required periodically. The type of testing exactly that is suitable will depend on the appliance or item in question. Different items fall into different electrical class categories. A risk assessment is also needed in order to rule out some testing methods. There are three key types of electrical testing. These are the earth continuity test, the earth resistance test and the insulation resistance test. One or several of these tests will be carried out with the use of specialised equipment such as an ohmmeter or portable appliance tester. When your electrical provider has gathered the readings, he or she should be able to immediately give you an explanation or indication of the condition of your appliances.

Test and Tag Melbourne

Once testing is completed, then the tagging side of the procedure takes place. This is essentially the labelling of each appliance with an indication of the results of the testing. This label will communicate the level of safety to all employees or even customers who will be using this appliance. It will demonstrate that the appliance has been professionally tested and deemed safe for professional use.

This is where the service used to end. However, nowadays there is a final stage to the visit. Your results will be recorded electronically, meaning if you should happen to misplace or damage your records, this information is still available to you. This is very helpful to business owners looking to keep documentation of the important parts of their workplace, and is also a good reference point to determine when a new test is required. Businesses should also be issued with a Certificate of Compliance. The best testing and tagging companies will deliver a complete report to you following the site visit which explains in easy to understand language the results of the testing and what these mean for you. This will advise any areas which need repair or replacement, as well as some tips on how to promote general electrical safety in the workplace. A test and tag report should form a crucial aspect of your annual risk review.

Testing and tagging must be carried out by a competent, careful and meticulous individual. The qualified local team in Melbourne is dedicated to offering the highest possible level of electrical service. Get in touch with the Talented Test And Tag Technicians in Melbourne at TestCorp.

No comments:

Post a Comment